October 27,20009
Miles, Lawrence, Paul, Frank Chiasson, Jim Hiltz,Chris
We reviewed the angles and formulae for the project again.
Leo talked us through the process of turning the bucket on the lathe once it is glued up.
A temporary top and bottom will be glued in place to provide for mounting with the chuck.
The outside will be turned round .
A flat will be cut to allow the steady rest to be placed.
The one end will be removed and the inside will be rounded.
Another temporary piece of wood will be used to remount the piece on the chuck from the inside and the outside will be rounded and lastly a groove for the bottom will be made.
An allen wrench has hard steel and can be shaped into a cutter to do the groove.
No comments:
Post a Comment